hp-38 powder Fundamentals Explained

hp-38 powder Fundamentals Explained

Blog Article

That currently being mentioned maybe I employed the incorrect load details. I utilized the load facts with the 124 GR. BERB HBRN TP as I used to be heading by bullet pounds. I did observe that the a hundred twenty five GR. SIE FMJ does use a better load.

& if you could potentially be so kind concerning click the Justice scales underneath my avatar, it would be greatly appreciated.

Generally bear in mind, the parents selling you powder You should not make the powder and two different distributors can market the exact same powder underneath distinctive names.

!) but….I wasn’t willing to aspect With all the hundreds and numerous bucks. I'll regret this I’m positive. I would like Nosler 168 grain Levels of competition bullets. Have got a new rifle I’m building up and not plenty of bullets for all my 30 cals.

It ought to be pointed out that loads of that screening was performed right before I commenced casting and I had been employing commercially Solid bullets. These bullets have been almost always more challenging than necessary and bevel dependent.

Possibly clean or hold the forcing cone angle reamed to the frienglier angle. (DougGuy here does this for the good deal of individuals on the forum).

Typical dynamics features a plant in Florida and copyright and probably owns Other folks somewhere They may be joined with ATK also in some hp-38 powder capability and therefore are within the Radford VA plant

I termed that good enough, seemed like the prudent matter to try and do. Was my chronograph Erroneous? Distinction in chamber spec, book information big finish, mine on the little conclusion? No method of understanding. I'd no too much strain signals other than the higher than envisioned velocity.

Practically nothing there suggests They can be exactly the same powders, or are even of precisely the same manufacture, or have like demand weights in almost any certain software.

38 Particular wadcutters using w231. My e book doesn’t give me details for 148gr jacketed , it does give 146gr jacketed info however. Questioning what my powder charge should be. Any data can be appreciated.

I also shoot IDPA revolver. That Activity examined 19 distinctive manufacturing facility cartridges before selecting a PF of one hundred and five. Previous limits of 125 were well into +P ranges. Rapid powders including Bullseye and Clays were fantastic at that amount and they are conventional Factory degree loads.

rjk454bfr explained: A great deal hp-38 powder of the previous reloading manuals can be obtained over the internet for free and i have copied and browse a pair dozen of em for my very own reference and comparison functions. There's often some thing to become acquired.

For reference, I'm able to shoot sub two" teams off the same relaxation and bench with many 1911's chambered in 45ACP with Montana Gold or Hornady XTP bullets, so I m in the position to shoot good teams off a relaxation.

I would use Bullseye in my 38spl loads but it surely runs to filthy for my liking. I choose Clays which burns quite thoroughly clean and consistent.